ULTRATHIN TOURBILLON SKELETON
RED GOLD & PLATINUM

THE FINESSE OF CURVES

With its graceful curves and wide apertures, Ultrathin Tourbillon Skeleton also stands out for its slimness. Its new case, with a diameter of 41.5 mm and a thickness of 8.4 mm, presents the flying tourbillon calibre in its purest expression. The Ultrathin Tourbillon Skeleton collection, adorned in red gold or platinum, is issued in two limited series featuring 28 watches apiece.

Arnold & Son continues its tour of the Ultrathin Tourbillon collection. The A&S8320 calibre unveils its curves, apertures and details within a 41.5 mm case in either red gold (5N) or platinum (PT 950), each released in a run of 28 timepieces. Encased in this precious housing, Arnold & Son’s flying tourbillon stands out for its finesse and precision.

Finesse, because at just 3.3 mm thick, it is one of the slimmest skeleton tourbillon calibres in existence. Precision, because this one-minute flying tourbillon is assembled with a variable-inertia balance for enhanced calibration stability.

RADIATING ORIGINALITY

The purpose of a skeleton is to convey a message, be it geometric, generic or minimal. For Ultrathin Tourbillon Skeleton, the skeletonisation of the calibre reveals pronounced curves and numerous inflection points that are highlighted by an original finish. On both the Ultrathin Tourbillon Skeleton Red Gold and Platinum, the bridges are treated with rose-gold PVD (4N) after being decorated with radiating Côtes de Genève stripes.

The flange around the calibre adopts this same finish, clearly revealing the Arnold & Son signature at 6 o’clock and enabling the off-centred white opal dial to be displayed in its purest form.

GOLDEN CARRIAGE

At the heart of Ultrathin Tourbillon Skeleton beats the A&S8320 calibre, whose architecture and slimness are its principal protagonists. Designed without an upper bridge to minimise its thickness, the calibre is classed as a flying tourbillon.

The variable-inertia balance with inertia blocks ensures more precise calibration over time. The slender triangular carriage is supported by a double arrow, which is actually a counterpoise. The arrowhead on the staff of the escape wheel serves as a seconds pointer, as the carriage completes one rotation per minute.

PERFORMANCE RESERVE

The changes to the tourbillon carriage and regulating organ give the A&S8320 calibre a power reserve of 100 hours. While this is a larger power reserve than for standard tourbillons, particularly slim ones, it is entirely in line with the performance regularly achieved by Arnold & Son calibres.

TECHNICAL SPECIFICATIONS

Functions hours, minutes

Movement
Calibre: A&S8320, 1-minute flying tourbillon, manual winding
Jewels: 29
Diameter: 32.00 mm
Thickness: 3.30 mm
Power reserve: 100 hours
Frequency: 3 Hz / 21,600 vph
Finishes:
mainplate: skeletonised, rose-gold PVD treatment (4N), Côtes de Genève stripes radiating from the centre
bridges: skeletonised, rose-gold PVD treatment (4N), polished and chamfered by hand, Côtes de Genève stripes radiating from the centre
wheels: circular satin-finished
screws: blued and chamfered, mirror-polished heads
tourbillon carriage: ‘Arnold & Son’ signature, polished, satin-finished and chamfered by hand

Dial white opal

Case
Material: 18-carat (5N) red gold or platinum (PT 950)
Diameter: 41.50 mm
Thickness: 8.40 mm (with crystal)
Crystal: domed sapphire with an anti-reflective coating on both sides
Case back: sapphire crystal with an anti-reflective coating
Water-resistance: 3 bar (30 metres/100 feet)

Strap
Material:
red gold: blue alligator leather, black alligator leather lining, hand-stitched
platinum: brown alligator leather, black alligator leather lining, hand-stitched

Clasp
folding clasp in titanium with cover in 18-carat (5N) red gold or platinum (PT 950)

References
red gold: 1UTBR.Z01A.C246R
platinum: 1UTBX.Z01A.C245X

Limited edition
red gold: 28 timepieces
platinum: 28 timepieces

Visit Us

World Trade Center

Abu Dhabi